How Houses Got Tight
Fifty years of energy code, and what it did to the air
Code cycle after code cycle since the 1970s, new houses have gotten tighter. That saves energy. It also changed how every chimney, range hood and fan in the house behaves.
The line that matters
Tested tight since 2012.
For most of the history of energy code, air sealing was a checklist item at most. The 2009 IECC offered a blower door test as an option, with a limit of 7 air changes per hour at 50 Pa. The 2012 IECC made the test required and cut the limit to 3 in most of the country, and the 2024 IECC cut it again in the warmest and coldest zones.
1970s
The energy crisis puts buildings on the map.
1973
- Oil embargo
The oil embargo
Energy prices surge. Heating and cooling buildings becomes a national issue.
1975
- EPCA
- ASHRAE 90-75
Federal energy law; ASHRAE 90-75
Congress passes the Energy Policy and Conservation Act. ASHRAE publishes Standard 90-75, the first national standard for energy-conserving building design.
1977
- DOE
U.S. Department of Energy
Federal energy agencies, including the Federal Energy Administration, combine into the new Department of Energy.
1978
- Title 24, Part 6
California energy standards
California's Building Energy Efficiency Standards for new buildings take effect, making the state an early leader in building energy codes.
1980s and 1990s
One model code for the whole country.
1983
- MEC
Model Energy Code
The Council of American Building Officials publishes the Model Energy Code, a national baseline for energy-efficient homes.
1992
- EPAct
- ENERGY STAR
Energy Policy Act; ENERGY STAR
Federal law has states review their residential codes against each new Model Energy Code edition. Separately, the EPA launches ENERGY STAR.
1994
- ICC
International Code Council
The three regional model code groups found the ICC: one body writing one family of model codes.
1998
- IECC
The first IECC
The Model Energy Code becomes the International Energy Conservation Code. A second edition follows in 2000, then a new one every three years.
2000s
Tight enough to need planned air.
2003
- ASHRAE 62.2
Residential ventilation
ASHRAE publishes its first residential ventilation standard.
For the air in the house
Fresh air now has to be designed in, not left to leaks.
2009
400CFM
- IRC 2009
Kitchen makeup air
The International Residential Code requires makeup air for kitchen exhaust over 400 CFM.
For the air in the house
The code recognizes that a big range hood can pull a house negative.
2009
7ACH50, optional
- IECC 2009
Air leakage: test optional
Builders show air sealing by visual inspection, or by a blower door test under 7 ACH50.
2009
$3.1BState grants
- ARRA
Codes for cash
The stimulus ties state energy grants to codes. All 50 governors commit to 2009 IECC-level codes and 90 percent compliance in eight years. Not every state followed through on time, but the 2009 code becomes the national baseline.
2012 onward
Tested tight, every house.
2012
3ACH50, tested
- IECC 2012
Blower door test required
Testing becomes mandatory: 3 ACH50 in climate zones 3 through 8, and 5 ACH50 in zones 1 and 2.
For the air in the house
In most of the country, a code-minimum house may now leak less than half the air the 2009 test limit allowed.
2012
< 5ACH50
- IRC 2012
Tight houses need mechanical ventilation
A house that tests tighter than 5 ACH50 must have whole-house mechanical ventilation.
For the air in the house
The code itself says these houses can no longer breathe through their skin.
2021
5ACH50 cap
- IECC 2021
A limit on every path
Performance and energy rating paths can trade some airtightness for other upgrades, but still have to test at 5 ACH50 or less.
2024
2.5–4ACH50
- IECC 2024
Tighter again
4.0 ACH50 in the warmest zones, 3.0 in the middle of the country and 2.5 in the coldest, with credits for testing tighter still.
For the air in the house
The house keeps getting tighter. The range hood stays the same size.
Today
0.6ACH50
- Passive House
High-performance programs
Passive House targets 0.6 ACH50, about one-fifth of the 3 ACH50 code limit.
What it means
The house got tighter. The exhaust didn't get smaller.
A 400 CFM range hood moves the same air in a 2024 house as it did in a 1980 house. In the old house, most of that air came back through the cracks. In a code-tight house, it comes back through the easiest opening it can find, and in a house with a fireplace, that is often the chimney.
That is why draft and makeup air now have to be designed together, for the room they share.
Sources
Where these dates come from.
U.S. Department of Energy, Building Energy Codes Program (2009, 2012 and 2024 IECC air leakage). Federal Register, January 10, 2001 (Model Energy Code to IECC succession). California Energy Commission (Title 24, Part 6). ASHRAE (Standards 90-75 and 62.2-2003). Congressional Research Service (ENERGY STAR). Journal of Light Construction and Construction Dive (stimulus code commitments). International Code Council (IECC and IRC).
Model code dates shown. Each state adopts code editions on its own schedule, often with amendments. Confirm the edition in force with the authority having jurisdiction.
